Lyra Hand-Knitted Tyvek LED Pendant Light With Chip Pattern
Lyra Hand-Knitted Tyvek LED Pendant Light With Chip Pattern
Hang the Lyra pendant above a table or in a reading corner, and the woven Tyvek shade does something glass and fabric never quite manage — each hand-knitted strand casts its own small shadow, turning the chip-pattern LED behind it into soft, dappled light instead of one flat glow. The nickel body stays slim and understated, so the shade carries the look, whether it lands in a living room, a hallway, or a dining nook that wants a bit more texture.
Every shade is knotted by hand, and the wide voltage range means it settles in wherever you plug it in — no rewiring, no adapter, just texture and light exactly where you want it.
Features
- Hand-knitted Tyvek shade — knotted by hand around the chip-pattern LED, so the light passing through reads soft and dappled rather than harsh.
- Cord-and-plug pendant — no hardwiring involved: hang it from a hook and plug into any standard outlet, with an inline knob switch right on the cord for on/off control.
- Wide voltage range — built for 90–240V AC, so it runs the same way no matter which outlet you plug it into.
Light and control
A single E27 LED bulb ships in the box, sized for a 5–10 sq m (about 54–108 sq ft) room — enough to anchor a reading chair, a hallway, or a small dining table. This fixture isn't dimmable, so control stays simple: the inline knob switch is on or off, nothing more to learn. Pick your colour temperature when you order — Warm 3000K for a cosy glow, or Cold 6000K for a crisper, brighter white.
Available sizes
Cord length comes in four lengths, so you can set the hanging height to fit your ceiling and the table or seat below it.
| Cord Length |
|---|
| 40 cm (15.7") |
| 60 cm (23.6") |
| 80 cm (31.5") |
| 100 cm (39.4") |
Specifications
| Type | Cord pendant lamp |
| Shade | Hand-knitted Tyvek paper, chip-pattern LED design |
| Light source | LED, E27 bulb included |
| Number of light sources | 1 |
| Lighting area | 5–10 sq m (54–108 sq ft) |
| Light colour | Warm 3000K or Cold 6000K |
| Voltage | 90–240V AC |
| Switch | Inline knob switch |
| Cord length | 40 / 60 / 80 / 100 cm (15.7–39.4") |
| Dimmable | No |
| Body finish | Nickel |
| Shade material | Tyvek paper |
| Certification | CCC, CE, CQC, EMC, FCC |
Frequently asked questions
Is the bulb included?
Yes — a single E27 LED bulb ships with the fixture, so there's nothing extra to source before you hang it.
Can I dim it?
No, this fixture isn't dimmable. The inline knob switch gives you a simple on/off control.
Which cord length should I choose?
Go longer, 80–100 cm, for a low-hanging look over a table, or shorter, 40–60 cm, if your ceiling is low or the pendant sits in a hallway.
Do I need an electrician to install it?
No — it's a cord-and-plug design, so you just hang it from a hook and plug it into a standard outlet.
Every order ships free with no minimum, and you have 30 days to return it if it's not right. Real human support is here at Support@fioriscas.com.
